Carlo Gavazzi EM24-DIN Modbus register haritası

Diğer adları: EM24 · EM24DIN · EM24-DIN PFA · EM24-DIN PFB · EM24-DIN X

Carlo Gavazzi EM24-DIN için 78 Modbus register: hatta gönderilen adres, 30001 biçimindeki referans, veri tipi, byte sırası, birim ve ölçek. Kaynak: EM24-DIN PFA, PFB & X models Communication Protocol (Version 4 Revision 0 (December 3, 2012)).

Three-phase DIN-rail energy meter with RS485 Modbus RTU (PFA, PFB and X models); scaled integers, low word first.

Yapay zekâ asistanı · MCP Ürün arayüzü · örnek veri

Harita: carlo-gavazzi/em24-dinYalnızca okuma

MCP · read_named okunuyor… ✓ 4 değer · 38 ms

read_named(device: "em24-1", keys: ["voltage_l1_n", "current_l1", "frequency", "active_power_l1"])

voltage_l1_n 230,4 V

current_l1 12,6 A

frequency 50,00 Hz

active_power_l1 8.420 W

Cihaz tipi: Enerji sayacı
Register sayısı: 78
Arayüzler: Modbus RTU
Varsayılan unit ID: 1
Byte sırası (çok register’lı değerler): CDAB
Okuma başına register: 11

Cihazda doğrulama

Henüz cihazda doğrulanmadı. Harita üretici dokümanından aktarıldı ve bir betikle dokümana karşı kontrol edildi; ilk okumaları cihazın ekranıyla karşılaştırın.

Kendi cihazınızda doğrulayın Seviyeler ne anlama geliyor

Bağlantı notları

Function codes 03 and 04 return the same values; input registers here can also be read as holding registers.
32-bit values are sent low word first (LSW, MSW); bytes inside each word are high byte first.
The document limits a read to 11 registers; registers in tables 2.4 to 2.8 are read one word at a time.
Write settings with function 06 (one register); broadcast (address 0) is accepted for writes only.
Serial settings are 8 data bits, no parity, 1 stop bit; only the baud rate is selectable.
A value whose high word is 7FFFh is an overflow and the display shows EEEE.
The EM24-DIN Ethernet and M-Bus models and the EM24-IS SFA and SFB models use other documents.

Register’lar

Üretici dokümanındaki gruplara göre. Register adları kaynak dokümandaki gibi İngilizcedir.

Gerilim 9 register

Ad ve anahtar	Referans	Adres	Tip	Byte sırası	Birim	Ölçek
Phase 1 line to neutral voltage`voltage_l1_n`	30001	0x0000	int32	CDAB	V	× 0.1
Phase 2 line to neutral voltage`voltage_l2_n`	30003	0x0002	int32	CDAB	V	× 0.1
Phase 3 line to neutral voltage`voltage_l3_n`	30005	0x0004	int32	CDAB	V	× 0.1
Line 1 to line 2 voltage`voltage_l1_l2`	30007	0x0006	int32	CDAB	V	× 0.1
Line 2 to line 3 voltage`voltage_l2_l3`	30009	0x0008	int32	CDAB	V	× 0.1
Line 3 to line 1 voltage`voltage_l3_l1`	30011	0x000A	int32	CDAB	V	× 0.1
System line to neutral voltage`voltage_l_n_sys`	30037	0x0024	int32	CDAB	V	× 0.1
System line to line voltage`voltage_l_l_sys`	30039	0x0026	int32	CDAB	V	× 0.1
Frequency`frequency`	30056	0x0037	int16		Hz	× 0.1

Akım 3 register

Ad ve anahtar	Referans	Adres	Tip	Byte sırası	Birim	Ölçek
Phase 1 current`current_l1`	30013	0x000C	int32	CDAB	A	× 0.001
Phase 2 current`current_l2`	30015	0x000E	int32	CDAB	A	× 0.001
Phase 3 current`current_l3`	30017	0x0010	int32	CDAB	A	× 0.001

Güç 16 register

Ad ve anahtar	Referans	Adres	Tip	Byte sırası	Birim	Ölçek
Phase 1 active power`active_power_l1`	30019	0x0012	int32	CDAB	W	× 0.1
Phase 2 active power`active_power_l2`	30021	0x0014	int32	CDAB	W	× 0.1
Phase 3 active power`active_power_l3`	30023	0x0016	int32	CDAB	W	× 0.1
Phase 1 apparent power`apparent_power_l1`	30025	0x0018	int32	CDAB	VA	× 0.1
Phase 2 apparent power`apparent_power_l2`	30027	0x001A	int32	CDAB	VA	× 0.1
Phase 3 apparent power`apparent_power_l3`	30029	0x001C	int32	CDAB	VA	× 0.1
Phase 1 reactive power`reactive_power_l1`	30031	0x001E	int32	CDAB	var	× 0.1
Phase 2 reactive power`reactive_power_l2`	30033	0x0020	int32	CDAB	var	× 0.1
Phase 3 reactive power`reactive_power_l3`	30035	0x0022	int32	CDAB	var	× 0.1
System active power`active_power_total`	30041	0x0028	int32	CDAB	W	× 0.1
System apparent power`apparent_power_total`	30043	0x002A	int32	CDAB	VA	× 0.1
System reactive power`reactive_power_total`	30045	0x002C	int32	CDAB	var	× 0.1
Phase 1 power factor`power_factor_l1`	30051	0x0032	int16			× 0.001
Phase 2 power factor`power_factor_l2`	30052	0x0033	int16			× 0.001
Phase 3 power factor`power_factor_l3`	30053	0x0034	int16			× 0.001
System power factor`power_factor_total`	30054	0x0035	int16			× 0.001

Enerji 10 register

Ad ve anahtar	Referans	Adres	Tip	Byte sırası	Birim	Ölçek
Total imported active energy`import_active_energy`	30063	0x003E	int32	CDAB	kWh	× 0.1
Total imported reactive energy`import_reactive_energy`	30065	0x0040	int32	CDAB	kvarh	× 0.1
Partial imported active energy`import_active_energy_partial`	30067	0x0042	int32	CDAB	kWh	× 0.1
Partial imported reactive energy`import_reactive_energy_partial`	30069	0x0044	int32	CDAB	kvarh	× 0.1
Phase 1 imported active energy`import_active_energy_l1`	30071	0x0046	int32	CDAB	kWh	× 0.1
Phase 2 imported active energy`import_active_energy_l2`	30073	0x0048	int32	CDAB	kWh	× 0.1
Phase 3 imported active energy`import_active_energy_l3`	30075	0x004A	int32	CDAB	kWh	× 0.1
Total exported active energy`export_active_energy`	30093	0x005C	int32	CDAB	kWh	× 0.1
Total exported reactive energy`export_reactive_energy`	30095	0x005E	int32	CDAB	kvarh	× 0.1
Hour counter`run_hours`	30097	0x0060	int32	CDAB	h	× 0.01

Durum 4 register

Ad ve anahtar	Referans	Adres	Tip
Phase sequence`phase_sequence`	30055	0x0036	int16
Digital input status`digital_input_status`	30769	0x0300	bitfield16
Current tariff`current_tariff`	30770	0x0301	uint16
Front selector status`front_selector_status`	30773	0x0304	uint16

Talep değerleri 5 register

Ad ve anahtar	Referans	Adres	Tip	Byte sırası	Birim	Ölçek
System active power demand`active_power_demand`	30047	0x002E	int32	CDAB	W	× 0.1
System apparent power demand`apparent_power_demand`	30049	0x0030	int32	CDAB	VA	× 0.1
Maximum system active power demand`active_power_demand_max`	30057	0x0038	int32	CDAB	W	× 0.1
Maximum system apparent power demand`apparent_power_demand_max`	30059	0x003A	int32	CDAB	VA	× 0.1
Maximum current demand`current_demand_max`	30061	0x003C	int32	CDAB	A	× 0.001

Tarife enerjileri 8 register

Ad ve anahtar	Referans	Adres	Tip	Byte sırası	Birim	Ölçek
Imported active energy, tariff 1`import_active_energy_t1`	30077	0x004C	int32	CDAB	kWh	× 0.1
Imported active energy, tariff 2`import_active_energy_t2`	30079	0x004E	int32	CDAB	kWh	× 0.1
Imported active energy, tariff 3`import_active_energy_t3`	30081	0x0050	int32	CDAB	kWh	× 0.1
Imported active energy, tariff 4`import_active_energy_t4`	30083	0x0052	int32	CDAB	kWh	× 0.1
Imported reactive energy, tariff 1`import_reactive_energy_t1`	30085	0x0054	int32	CDAB	kvarh	× 0.1
Imported reactive energy, tariff 2`import_reactive_energy_t2`	30087	0x0056	int32	CDAB	kvarh	× 0.1
Imported reactive energy, tariff 3`import_reactive_energy_t3`	30089	0x0058	int32	CDAB	kvarh	× 0.1
Imported reactive energy, tariff 4`import_reactive_energy_t4`	30091	0x005A	int32	CDAB	kvarh	× 0.1

Counters 3 register

Ad ve anahtar	Referans	Adres	Tip	Byte sırası
Counter 1`counter_1`	30099	0x0062	int32	CDAB
Counter 2`counter_2`	30101	0x0064	int32	CDAB
Counter 3`counter_3`	30103	0x0066	int32	CDAB

Info 4 register

Ad ve anahtar	Referans	Adres	Tip	Byte sırası
Version code`version_code`	30771	0x0302	uint16
Revision code`revision_code`	30772	0x0303	uint16
Serial number`serial_number`	34865	0x1300	string
Instrument secondary address`secondary_address`	34872	0x1307	uint32	CDAB

Ayarlar 16 register

Ad ve anahtar	Referans	Adres	Tip	Byte sırası	Birim	Ölçek
Password`password`	44353	0x1100	uint16
Type of application`application`	44354	0x1101	uint16
Measuring system`measuring_system`	44355	0x1102	uint16
Demand integration time`demand_interval`	44356	0x1103	uint16		min
Filter span parameter`filter_span`	44361	0x1108	uint16
Filter coefficient`filter_coefficient`	44362	0x1109	uint16
RS485 instrument address`modbus_address`	44363	0x110A	uint16
RS485 baud rate`baud_rate`	44364	0x110B	uint16
Current transformer ratio`ct_ratio`	44397	0x112C	uint32	CDAB		× 0.1
Voltage transformer ratio`vt_ratio`	44399	0x112E	uint32	CDAB		× 0.1
Reset all meters except the hour counter`reset_all_meters`	412289	0x3000	uint16
Reset total meters except the hour counter`reset_total_meters`	412290	0x3001	uint16
Reset partial meters`reset_partial_meters`	412291	0x3002	uint16
Reset hour counter`reset_hour_counter`	412292	0x3003	uint16
Reset counters 1, 2 and 3`reset_counters`	412293	0x3004	uint16
Reset maximum demand values`reset_demand_max`	412294	0x3005	uint16

Kaynak dokümanlar

EM24-DIN PFA, PFB & X models Communication Protocol , Carlo Gavazzi, Version 4 Revision 0 (December 3, 2012) (erişim 2026-11-09) Despite the file name, the document covers the EM24-DIN PFA, PFB and X models.

Bu haritayı GitHub’da inceleyin (YAML)

Adıyla okuyun

EM24-DIN cihazını yapay zekâ asistanıyla okuyun

Proxus Industrial MCP Server bu haritayı içerir. Haritayı cihaza tanımlayın; Claude, Cursor ya da VS Code register’ları anahtarıyla, doğru veri tipi, byte sırası, ölçek ve birimle okur. Yalnızca okur.

Bu cihaz Modbus RTU konuşur: bir Modbus TCP ağ geçidi üzerinden bağlanın; ağ geçidinin adresini ve cihazın unit ID’sini kullanın.

MCP sunucusunu edinin

proxus-mcp.json

{
  "devices": {
    "em24-1": {
      "protocol": "modbus-tcp",
      "host": "192.168.10.40",
      "unit_id": 1,
      "map": "carlo-gavazzi/em24-din"
    }
  }
}

Asistanınıza sorun

em24-1 cihazından voltage_l1_n, voltage_l2_n, voltage_l3_n değerlerini oku.

Yaptığı araç çağrısı

read_named(device: "em24-1", keys: ["voltage_l1_n", "voltage_l2_n", "voltage_l3_n"])

Bu cihaz sizde mi? Haritayı doğrulayın.

Asistanınızdan verify_device_map çalıştırmasını isteyin. Her register’ı yalnızca okuyarak bir kez okur, değerlerin makul olup olmadığını kontrol eder ve iki değeri ekranla karşılaştırmanızı ister. Bir rapor ve doldurulmuş bir GitHub kaydı hazırlar, siz gönderirsiniz; adınız bu haritanın doğrulayanlar listesine eklenir.

Doğrulama nasıl çalışır

Çok sayıda cihazdan mı veri topluyorsunuz?

Proxus, Modbus TCP ve RTU cihazlarını makinelerin yanında okur, geçmiş veriyi saklar ve değerleri panolara, veritabanlarına ve yapay zekâya aktarır.

Proxus’ta Modbus Endüstriyel bağlantı

Veri: Modbus Register Maps by Proxus contributors, CC BY 4.0.