Reference · for Operators, Engineers
Shift Handover
A dashboard item that shows each line's running shift beside the one before it, with units, rejects, running and fault minutes and the main fault.
The Shift Handover item shows one card per line, with two columns: the previous shift and the shift so far. Each column has its start time.
Each card shows:
- Good units and rejects.
- Minutes running and minutes stopped by a fault.
- The line's stops (its bottleneck machine stopped by a fault) and the fault with the most minutes.
When this shift has more rejects, fault minutes or line stops than the previous one, the value is amber.
The row above the cards adds up this shift across all lines: good units, line stops and the time lost to faults. Select a line to filter the other items of the dashboard by it.
Data fields
| Field | Kind |
|---|---|
| Line | Dimension |
| Group | Dimension |
| Shift | Dimension |
| Shift start | Dimension |
| Main fault | Dimension |
| Good units | Measure |
| Rejects | Measure |
| Running minutes | Measure |
| Fault minutes | Measure |
| Line stops | Measure |
Line and Shift are required: one row per line and shift. Bind Shift to a field whose value is This shift for the running shift; any other value counts as the previous shift. Shift start is shown under each column title, and Main fault fills the last row. Bind Good units, Rejects, Running minutes, Fault minutes and Line stops as numbers.
Where to see it
The Meridian demo plant uses it on Meridian · Shift Command Center.
Related
Was this page helpful?
Evaluating Proxus? See it on your own machines in a 30-minute technical session.